Ceramic Glass Platen

We can cut any size glass platen that you need.

​We Can Also Make You Any Length Of Safety Shelf.

NOTE:
We accept PayPal (which includes credit cards or e-checks).  
​
With check or money order payments, please use the Contact Form to place order.  All shipment of items paid with check or money order will be sent after clearing the bank.

Important: Carefully measure. Include the safety shelf in your measurements.  Example: If you r metal platen is 10" long and your safety shelf is 3/4", then your ceramic glass platen should be no longer than 9 1/4".  We can cut any size you need.  Just let us know on the contact page.

NOTE: Safety Shelf - This is the perfect size safety shelf for either a 1" or a 2" wide belt sander/grinders depending on the size you need.

---

CERAMIC GLASS PLATEN

$13.95 - $30.95

One piece of Ceramic Platen liner. Our standard size is 3/16" x 1" x 2 1/2 up to 3/6" x 2" x 12". The 1" wide fits most 1" x 30" belt Sander / Grinders. The 2" wide fits most 2" x 72" belt Sanders and 2" x 42" Grinders may take a similar size. However, we will custom cut a glass platen for any size grinder. Use the Contact Form to give us specifics if your size is not listed below.

 

IMPORTANT: CAREFULLY MEASURE. INCLUDE THE SAFETY SHELF IN YOUR

MEASUREMENTS.  Example:

If your metal platen is 10" long and your safety shelf is 3/4", then

your ceramic glass platen should be no longer than 9 1/4". We can cut

any size you need. Just let us know on the contact page.

 

 

We also carry a standard size for 1" x 30" belt sanders such as Harbor Freight and Grizzly. This measures 1" x 2 1/2" and various sizes. We can also custom cut any length of 1" glass for other types of grinders.

 

This is Neo-Ceram or Pyro-Ceram. A ceramic fireplace glass.

 

Neo-Ceram is modern material for our age. It is designed for thermal shock resistance and stability against high temperatures. Withstands continuous temperatures to 1292 degrees F. Nearly three times that of tempered glass.

 

Provides a smoother, longer lasting platen.

 

Mount this to your belt sander platen using J B Weld or 2 pieces of double sided high strength tape. There are several excellent You Tube videos (glass platen) for mounting instructions. HINT: If you use double sided tape, the platen can be carefully removed with acetone. Soak from the top and carefully pry with a putty knife until tape releases. This is especially useful if one side of platen is chipped. It can be reversed.

 

A small steel shelf installed to support your glass platen is a

must. These instructions are also included in the You Tube videos.

 

NOTE: MEASURE CAREFULLY BEFORE YOU ORDER. BE SURE TO INCLUDE IN YOUR MEASUREMENT THE EXTRA 3/4" NEEDED FOR THE a 2" SAFETY SHELF or 1/2" NEEDED FOR THE 1" SAFETY SHELF. 

 

RETURN POLICY: If received damaged, email photo within 2 days for replacement. If you break it while installing, you own all the pieces. 

Special Orders are not refundable.

 

NOTE: If the size you need is not in the drop down list, please use the "Contact Us" form and we will trim your platen to the size you need. One piece of Ceramic Platen liner. Our standard size is 3/16" x 2" x 5" to 3/16" x 2" x 12". This size fits most 2" x 72" belt Sanders. 2" x 42" Grinders may take a similar size. We also Ceramic Platen liner in sizes 3/16" x 1" 2 1/2" to 3/ 16" x 1" x 8". However, we will custom cut a glass platen for any size grinder. Use the Contact Form to give us specifics if your size is not listed below.

 

IMPORTANT: CAREFULLY MEASURE. INCLUDE THE SAFETY SHELF IN YOUR

MEASUREMENTS.  Example: If your metal platen is 10" long and your safety shelf is 3/4", then your ceramic glass platen should be no longer than 9 1/4". We can cut any size you need. Just let us know on the contact page.

 

We also carry a standard size for 1" x 30" belt sanders such as Harbor Freight and Grizzly. This measures 1" x 2 1/2"to 3/16"x 1" x 8". We can also custom cut any length of 1" glass for other types of

grinders.

 

This is Neo-Ceram or Pyro-Ceram. A ceramic fireplace glass.

 

Neo-Ceram is modern material for our age. It is designed for thermal shock resistance and stability against high temperatures. Withstands continuous temperatures to 1292 degrees F. Nearly three times that of tempered glass.

 

Provides a smoother, longer lasting platen.

 

Mount this to your belt sander platen using J B Weld or 2 pieces of double sided high strength tape. There are several excellent You Tube videos (glass platen) for mounting instructions. HINT: If you use double sided tape, the platen can be carefully removed with acetone. Soak from the top and carefully pry with a putty knife until tape releases. This is especially useful if one side of platen is chipped. It can be reversed.

 

A small steel shelf installed to support your glass platen is a

must. These instructions are also included in the You Tube videos.

 

NOTE: MEASURE CAREFULLY BEFORE YOU ORDER. BE SURE TO INCLUDE IN YOUR MEASUREMENT THE EXTRA 3/4" NEEDED FOR THE SAFETY SHELF. 

 

RETURN POLICY: If received damaged, email photo within 2 days for replacement. If you break it while installing, you own all the pieces. 

 

NOTE: If the size you need is not in the drop down list, please use the "Contact Us" form and we will trim your platen to the size you need.

Shop

Ceramic Glass Platen & Safety Shelf for either a 1" or a 2" Belts Sanders/ Grinders (Combo)

$24.95 - $41.95

NOTE: Safety Shelf - This is the perfect size safety shelf for either a 1" or a 2" wide belt sander/ grinders depending on the size you need.

Our pieces of Ceramic Platen liner are from a 3/16th x 1" x 2 1/2" up to 3/16" x 2" x 12". This sizes fit most 1" x 30" or a 2" x 72" belt Sanders. 2" x 42" Grinders takes a similar size. If you need any other length or width contact us. We will be glad to cut to your specifications. IMPORTANT: CAREFULLY MEASURE. INCLUDE THE SAFETY SHELF IN YOUR MEASUREMENTS. Example: If your metal platen is 10" long and your safety shelf is 3/4", then your ceramic glass platen should be no longer than 9 1/4". We can cut any size you need. Just let us know on the contact page.

 

 

A steel shelf 3/4" x 2" x 5/32" is included in the 2" package.

A steel shelf 1/2" x 1" x 5/32" is included in the 1" package.

This is the perfect size safety shelf for all 1" or 2" wide

belt sander / grinders. The shelf is drilled and tapped and includes 1/4 - 20

Cap Screws. Instructions with pictures are also included.

 

 

This is Neo-Ceram. A ceramic fireplace glass.

 

 

Neo-Ceram is modern material for our age. It is designed for

thermal shock resistance and stability against high temperatures. Withstands

continuous temperatures to 1292 degrees F. Nearly three times that of tempered

glass.

 

 

Provides a smoother, longer lasting platen.

 

 

Mount this to your belt sander platen using J B Weld or 2 pieces

of double sided high strength tape. There are several excellent You Tube videos

(glass platen) for mounting instructions. HINT: If you use good, strong, double

sided carpet tape, the platen can be carefully removed with acetone. Soak from

the top and carefully pry with a putty knife until tape releases. This is

especially useful if one side of platen is chipped. It can be reversed.

 

 

A small steel shelf installed to support your glass platen is a

must. These instructions are also included in the You Tube videos.

 

 

NOTE: MEASURE

CAREFULLY BEFORE YOU ORDER. BE SURE TO INCLUDE IN YOUR MEASUREMENT THE EXTRA 3/4" NEEDED FOR THE SAFETY SHELF. 

 

 

RETURN POLICY: If received damaged, email

photo within 2 days for replacement. If you break it while installing, you

own all the pieces. Not installing glass properly can lead to glass failure. And again you own all the pieces.

Special Orders are not refundable.

 

 

NOTE: If the size you need is not in the drop down list, please use the "Contact Us" form and we will trim your platen to the size you need.

Shop

Safety Shelf for 2" wide Ceramic Glass Platen. SAFETY SHELF ONLY

$13.95

For all 2" wide belt sanders/grinders. The safety shelf is one piece of steel ¾” x 2” x 5/32” thick.  This is the perfect size of safety shelf for all 2" wide belt sander/grinder.  A safety shelf needs to be just slightly thinner than the ceramic glass itself.  Our ceramic glass is 3/16”.  This allows the sanding belt to run smoothly without interference.  The safety shelf is drilled and tapped and comes with cap screws ready to install.

  Installation is easy.  Temporarily fasten the safety shelf to the base of your steel platen with a clamp or vice grips.  Carefully mark where you want to drill your holes with a “Sharpie permanent marker” or center punch.  Remove the safety shelf and drill ¼” holes in your metal platen where you marked.  Fasten the cap screws from the back of your steel platen.  Grind flat the screws that protrude so the face is flat.  Measure from your safety shelf to the top of the metal platen and order the length of ceramic glass your need. 

Instructions with photos will be enclosed with your order.

Shop

SAFETY SHELF ONLY for 1" x 30" for all 1" wide Ceramic Glass Platen Sander/Grinder

$12.95

Safety Shelf for 1" x 30" and for all 1" Sander / Grinder. Shelf measures 1/2" x 1" x 5/32.

SAFETY SHELF ONLY!

Shop

SPECIAL ORDER: Ceramic Glass Platen

$49.90

One combo of Ceramic Glass Platen and Safety Shelf size: 1" x 3" and 1" Safety Shelf.

Second combo of Ceramic Glass Platen and Safety Shelf size 1" x 2 1/2" and 1" Safety Shelf. The cost is $49.90 with free shipping and handling.

Refund Policy: Special Orders are not refundable.

Shop